Modern vehicle theft can involve much more than simply stealing a set of keys. Criminals may use key-cloning equipment, diagnostic tools and other electronic methods to gain access to a vehicle and attempt to start it.
The Nemesis 2 Immobiliser provides an additional layer of protection by requiring the driver to enter a personalised PIN sequence before the vehicle can be driven. Even if someone has the original key, the engine cannot be started normally without the correct sequence.
Discreetly integrated into the vehicle and operated through its existing controls, the Nemesis 2 is designed to provide robust everyday security without requiring the driver to carry an additional remote control.
What Is the Nemesis 2 Immobiliser?
The Nemesis 2 is an advanced vehicle immobiliser designed to prevent an unauthorised person from starting your vehicle.
Rather than relying solely on the factory key, the system requires a unique sequence to be entered via buttons and switches already fitted inside the vehicle. Depending on the vehicle, this could include controls on the steering wheel, dashboard, indicator stalk or radio.
The correct sequence effectively works like a password. Until it has been entered, the vehicle remains immobilised. This means that stealing, cloning or programming a key may not be enough to drive the vehicle away.

Nemesis 2 Immobiliser Features at a Glance
| Feature | How it works | Main benefit |
|---|---|---|
| Personalised PIN sequence | The driver creates a sequence using existing vehicle buttons | Only someone who knows the PIN can start the vehicle |
| Two to 20 inputs | The sequence can contain between two and 20 button presses | Provides flexibility when choosing a memorable but secure code |
| Automatic arming | The immobiliser activates after the vehicle is switched off | Protection does not depend on the driver remembering to arm it |
| Discreet installation | The system is integrated into the vehicle’s electronics | There is no obvious standalone device for a thief to locate |
| No transmitted radio signal | The immobiliser does not broadcast a conventional remote-control signal | Helps prevent detection using common scanning equipment |
| Valet or service mode | Temporary access can be provided without revealing the main PIN | Makes servicing, valeting and maintenance more convenient |
| Emergency override | A secure backup method is supplied | Provides access if the driver forgets the sequence |
| Existing controls | Uses suitable buttons already inside the vehicle | No additional keypad or everyday remote control is required |
| Professional installation | Installed and demonstrated by a trained installer | Helps ensure correct integration and reliable operation |
| Transferable system | The system may be moved to another compatible vehicle | It may continue protecting you after you change vehicles |
How Does the Nemesis 2 Work?
After entering the vehicle with the normal key, the driver enters their chosen PIN sequence using the selected controls. Once the correct sequence has been recognised, the immobiliser allows the vehicle to start, and the journey can continue normally.
When the journey ends, the driver switches off the engine and leaves the vehicle. The system then automatically rearms, helping to ensure that protection is active whenever the vehicle is parked.
Safe & Sound Mobile describes the Nemesis 2 as a CAN bus-integrated system. This means it works with the vehicle’s existing electronic communication network rather than relying on a highly visible aftermarket keypad or control box.
The normal routine is straightforward:
- Enter the vehicle using the regular key or the keyless entry system.
- Enter the personalised sequence using the selected buttons.
- Start the engine and drive normally.
- Switch off the vehicle when the journey is complete.
- Allow the immobiliser to rearm automatically.
Once the sequence becomes familiar, entering it should form a simple part of the driver’s normal starting routine.
The Main Benefits of the Nemesis 2 Immobiliser
Protection Even When the Keys Are Stolen
One of the most important advantages of a PIN-based immobiliser is that the vehicle key is no longer the only requirement for starting the engine.
A criminal may obtain the original key during a burglary or attempt to duplicate its signal, but they would still need to know the Nemesis 2 sequence. Without that additional authentication, the vehicle remains immobilised.
This makes the system particularly useful for drivers who want protection against theft methods targeting modern keys and keyless entry systems.
A Personalised Security Code
The Nemesis 2 sequence can be created from suitable controls already present inside the vehicle. The Safe & Sound Mobile product information states that the sequence can be as short as two inputs or as long as 20.
This allows the driver to choose a sequence that balances security with convenience. A longer sequence can be more difficult for another person to guess, while a carefully selected pattern should still be easy for the authorised driver to remember.
The sequence should not be shared unnecessarily or based on a pattern that someone could easily observe.
Discreet and Difficult to Detect
Visible security devices can sometimes show a thief what they need to locate or bypass. The Nemesis 2 is installed discreetly and integrated with the vehicle’s existing systems.
Safe & Sound Mobile states that the system emits no radio frequencies and is designed to remain undetectable to conventional scanning and diagnostic tools used by thieves.
Because there is no obvious external keypad or separate everyday remote control, a criminal may not immediately realise that an additional immobiliser is preventing the vehicle from starting.
Automatic Protection
Vehicle security is most effective when it does not require the owner to remember an extra step every time they park.
The Nemesis 2 rearms automatically after the ignition has been switched off and the vehicle has been exited. This helps reduce the likelihood of the system being left inactive by accident.
The driver completes the usual parking routine, while the immobiliser prepares itself for the next attempted start.
No Additional Fob for Normal Operation
Many security systems require the driver to carry a separate fob, card or remote. The Nemesis 2 primarily uses controls already installed in the vehicle, allowing the driver to authorise the start by entering their sequence.
This reduces the number of devices that need to be carried and avoids creating another everyday item that could be lost, damaged or stolen.
Convenient Valet and Service Mode
There will be times when another person needs temporary access to the vehicle. This could include a mechanic, a dealership technician, a tyre fitter, a bodyshop, or a professional valet.
The Nemesis 2 includes a dedicated mode for these situations. It allows the vehicle to be operated temporarily without requiring the owner to reveal their personal sequence.
Once the vehicle has been returned, the normal immobilisation protection can be restored.
Emergency Access
Forgetting a long or recently changed PIN could otherwise create an inconvenient situation. The Nemesis 2, therefore, includes a secure emergency override procedure.
Safe & Sound Mobile states that an emergency override code is supplied so the owner can regain access or reset the sequence if necessary. This information should be stored securely and separately from the vehicle rather than in the glovebox.
Will the Nemesis 2 Work With Every Vehicle?
Safe & Sound Mobile states that the Nemesis 2 can be installed in most vehicles manufactured after 2005. However, compatibility can vary depending on the manufacturer, model, production year, and the vehicle’s electronic system.
A compatibility check should therefore be completed before arranging installation. The installer can confirm whether the system supports the vehicle and which controls can be used to create the PIN sequence.
Professional advice is particularly important for unusual, imported, heavily modified or specialist vehicles.
Professional Nemesis 2 Installation
A modern immobiliser must be fitted and configured correctly. Safe & Sound Mobile provides professional installation at a customer’s home or workplace, subject to coverage and vehicle compatibility.
The website advises that installation normally takes approximately two hours. After fitting, the installer demonstrates how to enter the sequence, use the service setting and operate the emergency procedure.
Professional fitting also means that the device can be positioned discreetly and integrated without leaving an obvious component for a thief to identify.
Can the Nemesis 2 Be Combined With a Tracker?
The immobiliser is designed to prevent the vehicle from being started, while a GPS tracker is designed to help monitor and locate it if it is moved.
Combining the Nemesis 2 with an S7 or S5 tracker can therefore create layered vehicle security:
- The immobiliser helps prevent an unauthorised start.
- The tracker can identify movement and provide location information.
- Monitored tracker options may alert a monitoring centre to suspicious activity.
- Certain insurance-approved trackers may help meet an insurer’s security requirements.
Safe & Sound Mobile offers Nemesis 2 packages with S7, S5, and asset-tracking products for customers who want both prevention and tracking in a single security package.
The correct package will depend on the vehicle, its value, the owner’s requirements and any conditions set by their insurer.
Is the Nemesis 2 Immobiliser Worth Considering?
The Nemesis 2 may be suitable for drivers who want a discreet security system that does not rely solely on the factory key.
Its personalised PIN sequence, automatic arming, covert installation, and service mode make it practical for regular use and difficult for an unauthorised driver to overcome.
It may be particularly valuable for:
- Keyless-entry vehicle owners
- Drivers of desirable or high-value vehicles
- Van owners carrying tools or equipment
- Motorhome and leisure-vehicle owners
- Drivers are concerned about key theft or cloning
- Owners looking to combine an immobiliser with GPS tracking
No individual security product can guarantee that a vehicle will never be targeted. However, adding an independent authorisation stage can make starting and stealing the vehicle considerably more difficult.
Frequently Asked Questions
Do I need to enter the PIN every time?
The sequence normally needs to be entered before starting the vehicle once the immobiliser has armed. The exact operating process will be demonstrated during installation.
What happens if someone steals my keys?
Possession of the key alone should not allow the person to start the vehicle. They would also need to know and correctly enter the personalised Nemesis 2 sequence.
Can a mechanic drive the vehicle?
Yes. The system includes a temporary service or valet setting, allowing authorised access without disclosing the owner’s normal PIN.
What happens if I forget my code?
A secure emergency override procedure is provided. The override information should be kept in a safe place outside the vehicle.
Can I change the sequence?
The system is designed to use a personalised sequence. Your installer can explain the correct procedure for managing or changing it.
Can it be moved to another vehicle?
Safe & Sound Mobile states that the system can be transferred when the owner changes vehicles, subject to compatibility and professional removal and installation.
Final Thoughts
The Nemesis 2 Immobiliser provides an additional barrier between a thief and your vehicle. Instead of relying solely on the key, it requires a secret sequence to be entered through the vehicle’s existing controls.
With automatic arming, a customisable PIN, discreet CAN bus integration, valet mode and emergency access, it combines advanced security with straightforward daily operation.
For the best results, vehicle compatibility should be confirmed, and the system fitted professionally. Drivers looking for broader protection can also consider combining the Nemesis 2 with an S7 or S5 tracking system for both theft prevention and vehicle-location support.



