No products in the cart.
S-6902T 6×9″ Thin-Mount Coaxial Speakers | Slim Fit
£59.99
- Big 6×9″ sound where depth is tight – the S-6902T uses a thin, shallow-mount design that fits doors and rear decks a full-depth 6×9″ won’t.
- Smooth, refined highs – a 0.75″ pure silk dome tweeter delivers detailed treble without the harshness worn factory speakers can have.
- Full, deep low end – the large 6×9″ DDC-coated cone reaches down to 55 Hz for rich, satisfying mid-bass.
- Strong, efficient output – 50W RMS per speaker (150W max) and 89 dB sensitivity make the most of your power.
- Fitted properly by Safe and Sound – with 30+ years’ experience, our installers wire and seat your speakers cleanly for the best result.
- Sold as a pair – a balanced left-and-right upgrade in one purchase.
Get big 6×9″ sound in a slim package with the S-6902T 6×9″ thin-mount coaxial speakers, an easy OEM replacement supplied and expertly fitted by Safe and Sound, the vehicle audio and security specialists with over 30 years’ experience.
Full-size 6×9″ sound where depth is tight
The 6×9″ is the classic rear-deck and door speaker, but a full-depth version will not always fit behind a panel or in a shallow rear shelf. The S-6902T solves that. It is a drop-in OEM replacement built on a thin, shallow-mount design, so you get the big, full sound of a 6×9″ speaker in spaces where a standard one simply will not go.
Smooth highs and a deep low end
The S-6902T is a true 2-way coaxial. A 0.75″ pure silk dome tweeter with a neodymium magnet and SEL (Sound Expander Lens) ring gives smooth, refined high frequencies, while the large 6×9″ DDC-coated 2-layer paper cone reaches down to 55 Hz for rich, full mid-bass. The result is a clear, balanced sound from the same head unit and wiring.
Strong, efficient and built to last
With 50W RMS per speaker, 150W peak and 89 dB sensitivity, the S-6902T makes good use of your power and stays clean as you turn it up. An EFF (Efficient Flux Field) motor structure with a 10 oz magnet and a rigid tooled basket keeps the design efficient and solid, while a double-pressed treated foam surround stands up to daily use. The shallow 2.5″ mounting depth is the whole point of this model, and the speakers are supplied as a pair.
- Thin, shallow-mount design – fits where a full-depth 6×9″ won’t.
- 2-way coaxial with silk dome tweeter – smooth, refined highs.
- 55 Hz to 20 kHz response – rich, full mid-bass.
- 50W RMS / 150W max per speaker – strong, efficient output.
S-6902T key specifications
| Specification | Detail |
|---|---|
| Type | 6×9″ thin-mount 2-way full-range coaxial |
| Supplied as | Pair |
| Design | Shallow-mount drop-in OEM replacement |
| Power handling (RMS / peak) | 50W / 150W per speaker |
| Sensitivity (1W / 1M) | 89 dB |
| Frequency response | 55 Hz to 20 kHz |
| Cone | 2-layer DDC-coated paper |
| Tweeter | 0.75″ pure silk dome, neodymium magnet, SEL ring |
| Surround | Double-pressed treated foam |
| Magnet | 10 oz |
| Mounting depth | 2.5″ (thin mount) |
| Nominal impedance | 4-ohm |
Why have Safe and Sound fit it?
Even a drop-in speaker sounds its best when it is fitted properly. Our team makes sure your S-6902T speakers are wired with the correct polarity, seated securely and free of rattles, so you get clean, balanced sound from both sides. With three decades of in-car audio installation behind us, we get it right the first time, and back our work with honest, professional advice.
Need big 6×9″ sound in a shallow space?
Related products
Out of stock
S-6902T 6×9″ Thin-M... £59.99