S-6802 6×8″ Coaxial OEM Speakers | Clear, Full Sound
£46.99
- An easy upgrade for tired factory speakers – the S-6802 is a drop-in OEM replacement that brings clearer, fuller sound with no cutting or modifying.
- Fits a common factory oval – the 6×8″ design also drops into 5×7″ openings, covering a wide range of vehicles.
- The fullest, deepest sound in the S-Series coaxial range – reaches down to 56 Hz for warm, satisfying mid-bass.
- Handles the most power of the range – 60W RMS per speaker (180W max) stays clean and strong when you turn it up.
- Fitted properly by Safe and Sound – with 30+ years’ experience, our installers wire and seat your speakers cleanly for the best result.
- Sold as a pair – a balanced left-and-right upgrade in one purchase.
Bring clear, full sound back to your car with the S-6802 6×8″ full-range coaxial speakers, an easy OEM upgrade supplied and expertly fitted by Safe and Sound, the vehicle audio and security specialists with over 30 years’ experience.
A simple drop-in upgrade
Factory speakers fade over time and rarely do your music justice. The S-6802 is designed as a drop-in replacement for the 6×8″ oval locations used in many vehicle doors and rear decks, and it also fits 5×7″ openings, so you can upgrade the sound without cutting, drilling or major modification. It is one of the most cost-effective ways to make your existing system sound noticeably better.
Smooth highs and a deep low end
The S-6802 is a true 2-way coaxial. A 0.75″ pure silk dome tweeter with a neodymium magnet and SEL (Sound Expander Lens) ring gives smooth, refined high frequencies, while the larger 6×8″ DDC-coated 2-layer paper cone reaches down to 56 Hz for the deepest, fullest mid-bass in the S-Series coaxial range. The result is a clear, balanced sound from the same head unit and wiring.
The most power in the range
With 60W RMS per speaker and 180W peak, the S-6802 handles the most power of the S-Series coaxials, so it stays clean as you turn it up. An EFF (Efficient Flux Field) motor structure with a 10 oz magnet and a rigid tooled basket keeps the design efficient and solid, while a double-pressed treated foam surround stands up to daily use. The speakers are supplied as a pair.
- Drop-in OEM replacement – fits common 6×8″ and 5×7″ openings.
- 2-way coaxial with silk dome tweeter – smooth, refined highs.
- 56 Hz to 20 kHz response – the deepest mid-bass in the range.
- 60W RMS / 180W max per speaker – the most power in the range.
S-6802 key specifications
| Specification | Detail |
|---|---|
| Type | 6×8″ 2-way full-range coaxial |
| Supplied as | Pair |
| Design | Drop-in OEM replacement (also fits 5×7″) |
| Power handling (RMS / peak) | 60W / 180W per speaker |
| Sensitivity (1W / 1M) | 88 dB |
| Frequency response | 56 Hz to 20 kHz |
| Cone | 2-layer DDC-coated paper |
| Tweeter | 0.75″ pure silk dome, neodymium magnet, SEL ring |
| Surround | Double-pressed treated foam |
| Magnet | 10 oz |
| Mounting depth | 2.3″ |
| Nominal impedance | 4-ohm |
Why have Safe and Sound fit it?
Even a drop-in speaker sounds its best when it is fitted properly. Our team makes sure your S-6802 speakers are wired with the correct polarity, seated securely and free of rattles, so you get clean, balanced sound from both sides. With three decades of in-car audio installation behind us, we get it right the first time, and back our work with honest, professional advice.
Ready to upgrade your factory sound?
Related products
Out of stock
Out of stock
S-6802 6×8″ Coaxial...
£46.99