No products in the cart.
PS-WB102 Dual 10″ Loaded Bass Enclosure | Big Sound
£314.99
- Deep, hard-hitting bass straight out of the box — a ready-loaded dual 10″ enclosure that drops a powerful low end into your existing sound system with no design headaches.
- Tighter, more controlled bass than a generic build — the PS-WB102 is engineered with the woofers matched to the box, so you get cleaner output that handles more power.
- Serious headroom for big nights — 500W RMS / 1,000W max means room-shaking volume without straining.
- Built to take a beating — 2-tone aircraft-grade vinyl finish and treated foam surrounds stand up to daily in-car use.
- Fitted properly by Safe and Sound — with 30+ years’ experience, our installers handle the wiring and amp matching cleanly and reliably, first time.
- Simple to run — a single 4-ohm input keeps amplifier pairing straightforward.
Add a serious low end to your car with the PS-WB102 Dual 10″ Bass Enclosure — a ready-loaded, vented bass enclosure supplied and expertly fitted by Safe and Sound, the vehicle audio and security specialists with over 30 years’ experience.
Big bass without the guesswork
Building a subwoofer box from scratch is a gamble. The PS-WB102 takes that risk away. PowerBass engineer the woofers to suit the enclosure — not the other way around — so the result is a deeper, tighter bass that handles more power and sounds genuinely controlled rather than boomy. It’s a smart, affordable way to transform the bottom end of your sound system.
Engineered for loud, clean output
A computer-optimised acoustic chamber and a bass reflex aero/slot port system are tuned to a low frequency for output you’ll feel as much as hear. Twin 2-layer DDC-coated ribbed paper cones, 2″ BASV high-temperature voice coils and double-pressed treated foam surrounds keep things tight and reliable, even when you push the volume.
- Dual 10″ loaded design — two woofers working together for proper impact.
- 500W RMS / 1,000W max — plenty of headroom for everyday driving and big sessions alike.
- Single 4-ohm input — simple, predictable amplifier matching.
- 2-tone aircraft-grade vinyl finish — hard-wearing and tidy in the boot.
PS-WB102 key specifications
| Specification | Detail |
|---|---|
| Configuration | Dual 10″ vented loaded enclosure |
| Power handling | 500W RMS / 1,000W max |
| Nominal impedance | Single 4-ohm input |
| Frequency response | 33 Hz – 150 Hz |
| Sensitivity (1W / 1M) | 96 dB |
| Cone | 2-layer DDC-coated ribbed paper |
| Voice coil | 2″ BASV high-temperature |
| Magnet | 40 oz |
| Port system | Bass reflex aero / slot |
| Finish | 2-tone aircraft-grade vinyl |
| Dimensions | 17″W × 12.25″H × 11.4″ top depth / 13.75″ bottom depth |
Why have Safe and Sound fit it?
A great enclosure only performs when it’s wired and matched correctly. Our team handles power and earth runs, amplifier gain setting and secure mounting so your PS-WB102 sounds its best and stays safe on the move. With three decades of in-car audio installation behind us, we get it right the first time — and back our work with honest, professional advice.
Ready to feel the difference?
Related products
PS-WB102 Dual 10″ Loaded... £314.99