No products in the cart.
PS-WB101 10″ Loaded Bass Enclosure | Big Sound
£209.99
- Deep, tight bass straight out of the box – a ready-loaded single 10″ enclosure that adds real low end to your existing sound system with no design guesswork.
- Cleaner, more controlled bass than a generic build – the PS-WB101 is engineered with the woofer matched to the box, so it sounds tight rather than boomy.
- Sensible power for everyday use – 250W RMS / 500W max gives strong, reliable output without needing a huge amplifier.
- Built to last – 2-tone aircraft-grade vinyl finish and a treated foam surround stand up to daily in-car use.
- Fitted properly by Safe and Sound – with 30+ years’ experience, our installers handle the wiring and amp matching cleanly and reliably, first time.
- Compact and easy to run – a single 4-ohm input keeps amplifier pairing simple.
Add a clean, punchy low end to your car with the PS-WB101 10″ Vented Enclosure, a ready-loaded bass reflex enclosure supplied and expertly fitted by Safe and Sound, the vehicle audio and security specialists with over 30 years’ experience.
Big bass without the guesswork
Building a subwoofer box from scratch is a gamble. The PS-WB101 takes that risk away. PowerBass engineer the woofer to suit the enclosure, not the other way around, so the result is a deeper, tighter bass that handles its power well and sounds genuinely controlled rather than boomy. It is a smart, affordable way to upgrade the bottom end of your sound system.
Engineered for clean, controlled output
A computer-optimised acoustic chamber and a bass reflex aero/slot port system are tuned to a low frequency for output you will feel as much as hear. A 2-layer DDC-coated ribbed paper cone, a 2″ BASV high-temperature voice coil and a double-pressed treated foam surround keep things tight and reliable, even when you turn it up.
- Single 10″ loaded design – real impact from a compact, boot-friendly box.
- 250W RMS / 500W max – strong output without needing a large amplifier.
- Single 4-ohm input – simple, predictable amplifier matching.
- 2-tone aircraft-grade vinyl finish – hard-wearing and tidy in the boot.
PS-WB101 key specifications
| Specification | Detail |
|---|---|
| Configuration | Single 10″ vented loaded enclosure |
| Power handling | 250W RMS / 500W max |
| Nominal impedance | Single 4-ohm input |
| Sensitivity (1W / 1M) | 96 dB |
| Cone | 2-layer DDC-coated ribbed paper |
| Voice coil | 2″ BASV high-temperature |
| Surround | Double-pressed treated foam |
| Port system | Bass reflex aero / slot |
| Finish | 2-tone aircraft-grade vinyl |
| Dimensions | 17″W x 12.25″H x 11.4″ top depth / 13.75″ bottom depth |
Why have Safe and Sound fit it?
A great enclosure only performs when it is wired and matched correctly. Our team handles power and earth runs, amplifier gain setting and secure mounting so your PS-WB101 sounds its best and stays safe on the move. With three decades of in-car audio installation behind us, we get it right the first time, and back our work with honest, professional advice.
Ready to feel the difference?
Related products
PS-WB101 10″ Loaded Bass... £209.99